What is AbOx?
- AbOx is a system to share code and uses the keys donql Xeirfr to get the keys and then sent to any device on the Internet.
Why so-called “AbOx”?
- Fired on the name of this Protocol AbOx short for Ali Box or Arab Box.
This system consists of participation AbOx?
- Participation AbOx system consists of two when the first owner will be donql Server and other server when the user will be the client Client.
What is the communication protocol used?
- Uses a system of co AbOx Protocol TCP connection, the same protocol used in the system of co CCcam.
Is the data sent through the system AbOx encrypted?
- Data sent through the system of co AbOx encrypted by an encryption key automatically changes with each run and is therefore secure.
Do you consume the system of co AbOx Traffic Traffic substantial “Albiataat sending and receiving?”
- The system of co AbOx consumes Traffic is very, very simple, negligible in comparison with other protocols, it is sending ECM continuously like other systems, but is sending a data channel only when you change the channel in Alkleint, and sends the server keys in the event of change only.
What are the features of the system of co AbOx?
- System provides the possibility to participate AbOx donql participation over the network and therefore it can use donql your device at the same time on another machine, so that it works on the local machine Local Pc and the remote machine Remote Pc.
- Can be used to open more than one channel at the same time in display drivers, which provides PIP feature such as the Dream Dvb.
- Provides the possibility of conversation between the server and written Alkleint.
- The system of co AbOx free.
Are the experience-sharing system AbOx?
- Has been the experience of participation donql over the network and it works very quickly and without cutting and speed depends on the type and number of participants donql.
What is a satellite-supported system of co AbOx? Supports the system of co AbOx Arab satellites and satellite only where there are no pornographic channels and I ask Me not to support the foreign channels.
Does the system of co AbOx on the computer only?
- Design the system of co AbOx to work on the computer as well as space on the receiver “receiver” was tried out its work successfully.
What are the requirements to run the system of co AbOx? First – server Server:
1 – Donql Twin Protocol protocol is supported with a link Cyril com RS232.
2 – a program file server AbOx.exe.
3 – settings file AbOx.ini.
4 – My name is Eibe Dynamic IP can be obtained free of Abyei My name is one of the sites such as Cant See Links as well as take into account the load the updated IP address.
5 – Internet service.
6 – Opening port used in the server.
Secondly Alkleint Client:
1 – File Albelkin HaTy.dll for use with the display drivers or program Alkleint HaTy.exe.
2 – settings file HaTy.ini.
3 – Internet.
How many participants in each server? – AbOx sharing system designed to serve 20 users at the same time via the Internet in addition to the (card in the computer Alsatleight + receiver is plugged into the entrance of Alcyril).
Modus operandi of the system of co AbOx:
Server Server:
File is placed and the file server AbOx.exe AbOx.ini settings in a special folder the program, as well as take into account the mobilization of data file settings.
- Update IP update program using the nominal IP.
- Connect donql computer via the link Alcyril com.
- Run the server and select the entrance AbOx.exe Alcyril com connected by donql then pressing the button Start Session.
- To enable Almichtrkin connect to server is pressure on the Start Server button and disconnect you press the button Stop Server.
- To enable / stop chat messages between the server and are identified Alkleint / un-check before the Chat Messages.
- To enable / arrest Alert chat messages is selected / un-check before the Message *****.
- To enable / stop mode TV is no choice entrance Alcyril com connected by the receiver with the computer and then pressing the button Start Tv’s Session, and when you activate the TV mode key will be sent to the receiver.
- To change the language chosen in Arabic or English menu, Language.
- To activate the TV mode must provide a satellite “receiver” protocol that is in addition to the entrance of Twin Cyril com extra computer.
Alkleint Client: file is placed Alkleint HaTy.dll HaTy.ini and configuration file in the Plugins folder software supply, and the mobilization of data file settings.
- Run the show and choose the entrance to Kom connected by donql then pressing the button Start Session.
- To enable Alkleint connect to server you press the button Connect and disconnect you press the button Disconnect.
- To enable / stop chat messages between the server and are identified Alkleint / un-check before the Chat Messages.
- To enable / arrest Alert chat messages is selected / un-check before the Message *****.
- To enable / stop TV mode is selected / un-check before Tv Mode and choosers entrance Alcyril com connected by the receiver with the computer and then pressing the button Start Session, and when you activate the TV mode key will be sent to the receiver instead of the card Alsatleight.
- To change the language chosen in Arabic or English menu, Language.
- To activate the TV mode must provide a satellite “receiver” protocol that Twin connected with the entrance of cable RS232 Alcyril com in the computer.
Configuration file AbOx.ini:
The software uses to load the settings when you start the program and is divided into three sections.
- First Section [Server] and this section Connection Settings:
[Server]
ServerPort = 5555 port number used to connect to, and can be changed any number up to 65535.
- Section II [Setting] and represents the program settings:
[Setting]
Interval = 1000 waiting period of 10 micro seconds to 3 seconds, the default value of 1000 represents 1 second.
Chat = 1 to enable chat messages, 1 is enabled and 0 is activated.
Message *****= 1 alarm audio chat messages, 1 enabled, 0 disabled.
AutoConnect = 1 Enabled Automatic Connection 1 and 0 disabled.
Y6Dongle = 1 and determine the type of dongleY6, the value 1 for Donql Y6 and 0 for the rest of the species.
DongleID = 16 number represents the type of tariff donql.
- Section III [Beers] and represents the information of participants:
[Beers]
Ali HaTy Libya
Ali is the name of the subscriber.
HaTy represents the login name.
Libya represents a PIN.
You can add 20 lines to this section each line represents a common and can choose a user name and login name and password by the desire not to exceed the length of the name 30 characters.
Configuration file HaTy.ini:
Used Albelkin HaTy.dll Aualbr.s. HaTy.exe to download the settings when you start the program and is divided into two parts:
- First Section [Client], and this section Connection Settings:
Name = Ali the name of the server.
Username = HaTy user name that is obtained from the server.
Password = Libya password that was obtained from the server.
ServerIP = server.no-ip.biz nominal IP Server.
ServerPort = 5555 port to connect to server-user, type of TCP.
- Section II [Setting] and represents the program settings:
[Setting]
Interval = 1000 waiting period of 10 micro seconds to 3 seconds, the default value of 1000 represents 1 second.
Chat = 1 to enable chat messages, 1 is enabled and 0 is activated.
1 *****= audible alarms for incoming chat messages, 1 enabled, 0 disabled.
AutoConnect = 1 automatic connection to server at startup, 1 enabled, 0 disabled.
DongleID = 16 number represents the type of tariff donql.
Important Notes:
- Please do not use in anger of God.
- No change icons and program data for any reason, and must respect the rights of programmed not to change the program or change the personal data.
- To prevent manipulation of the program to open to foreign channels, and wanted to support foreign channels Vlisamm his agenda.
- The program is free and prevents its use for commercial purposes
